455 Broadway, Everett, MA 02149
(617)
381-0577 1-800-875-0577 FAX: (617) 381-0547
|
|
vacuums
page 1
 page 2 |
|
Back to Online Catalog
|
|
| Our line of MBS burnishers are designed for
top professional results, to achieve the high gloss "wet look" on hard surface
flooring. Easier and faster,
operates in a straight line rather than side-to-side. Productivity is increased and
fatigue is reduced.
Burnishers are available in 1000, 1500 and
2000 RPM pad speed. |
|
|
|
 |
Flexible dual trigger for left or right hand operation are
non-conductive and have built-in safety lockouts to prevent accidental startup. |
|
|
Heavy duty switch is set in a die cast aluminum switch box,
won't chip or rust. |
|
|
Standard on all burnishers is a permanently mounted pad
holder with threaded pad centering device. |
|
|
Reinforced cast aluminum body and chrome plated heavy gauge
steel apron for durability. |
|
|
Equipped with carbon brush wear indicator light. |
|
|
Non-marring rubber bumpers, prevent furniture damage. |
|
|
Equipped with 50Ft. 14/3 safety, yellow power cord. |
|
|
MBS-1000E and 1500E are UL and CSA listed. MBS 1500EF
and 2000EF are UL listed. |
|
|
|
| 1000
RPM Burnisher 20" |
1500
RPM Burnisher 20" |
2000
RPM Burnisher 20" |
| A perfect choice for
daily floor maintenance when spray-buffing and polishing floors, eliminating the need for
frequent stripping and refinishing. |
Our most popular
model for burnishing floors to a smooth, high gloss finish. The Cantilever pad pressure system allows weight
to be evenly maintained for a consistent luster across the floor surface. Pad
pressure is adjustable to accommodate various pad thicknesses. |
For a lasting high
gloss "wet-look", choose the 2000 RPM burnisher. Floor finish is locked in
for a hard wear-resistant shine, making every day maintenance a breeze. It is
equipped with a pad pressure indicator light, and an adjustable front caster to control
AMP draw and pad pressure. The built-in 18 AMP circuit breaker protects against
overload. |
|
|
|
MBS-1000E (371874)
1000 RPM - 14 AMPS |
|
MBS-1500E (388858)
1500 RPM - 15 AMPS |
|
MBS-1500EF (312991)
1500 RPM - 10.5 AMPS |
|
MBS-2000EF (312916)
2000 RPM - 12 AMPS |
|
|
Motor - 120V, Permanent Magnet DC Rectified
for AC Operation |
|
Motor HP - 1 1/2 |
|
Transmission Drive - V-Belt |
|
Pad Diameter - 20" |
|
Wheels - 4" Transport / 8"
Operating |
|
|
NOTE:
Most models are available in 100V, 230V, - 50/60 Hz, 400 Cycle |
|
|
|
|
|
|
| Lightweight, compact and
easy to use, the X-411 has a surprisingly large eight gallon capacity. Easy to maneuver on four swivel casters.
Ideal for cleaning upholstery and carpet in
offices, apartments, stores, hotels, motels, schools and many other applications. |
|
|
|
|
The shared eight gallon solution/recovery system divides
solution with a bladder. It is pumped out during the cleaning operation as the
bladder collapses. Dirty solution is being vacuumed up and recovered in the commonly
shared tank. |
|
|
Convenient see-thru dome allows for constant monitoring of
the extractors cleaning effectiveness. |
|
|
Non-drip spray nozzles distribute water
evenly into the
carpet fibers. Dirt is flushed to the surface and grimy solution is removed
simultaneously by the vacuum system. |
|
|
Equipped with a built-in shutoff to prevent overflowing. |
|
|
Equipped with a quick release cord system. Carry
handles make for easy transport. |
|
|
Easy to empty into a floor drain or a bucket. Uncap
the drain hose and let gravity do the job. |
|
|
Cleaning accessories included: 10Ft. Solution Hose; 10
Ft. Flexible Vacuum Hose; 5 Ft. Stainless Steel Wand with 10" Nozzle and Two Spray
Jets; Upholstery Hand Tool. |
|
|
SPECIFICATIONS
X-411 (315095) |
|
|
Tank Construction |
|
Pressure Molded Seamless
Fiberglass |
|
Capacity |
|
8 Gal. Solution / 8 Gal.
Recovery (Shared Chamber) |
|
Cleaning Path |
|
10" with 2 Spray Jets |
|
Vacuum Motor |
|
120V, 1.3 HP, 97 CFM, 93"
Waterlift, 8.3 AMPS |
|
Water Output |
|
2.0 GPM - Maximum |
|
Pump Pressure |
|
50 PSI |
|
Power Cord |
|
25 Ft, 3 Wire, Grounded |
|
Note:
Available in 100V, 230V - 50/60 Hz, 400 Cycle |
|
|
|
|
|
|
|
|
 |
|
| Designed for a dual purpose, these floor
machines are an economical and practical approach when looking for the most effective use
of equipment. Scrub and strip floor at the
lower speed.
Buff floors to a high luster at the higher speed with the
flip of a switch or turn of a dial. |
|
|
|
|
|
|
|
|
|
|
The
standard and high speed floor machines are available in a variety of brush sizes and motor
horsepower to meet the various need of floor care professionals.
Field-tested to withstand the
demanding heavy duty use required for stripping, scrubbing and polishing hard surface
flooring. |
|
|
|
|
All steel triple planetary gear system, permanently lubricated
is standard on all models*, with
specially designed flex coupler to guard against possible motor damage when under load. |
|
Flexible dual triggers for left or right hand operation are
non-conductive and have built-in safety lockouts to prevent accidental startups. |
|
The heavy duty switch is set in a die cast aluminum switch box,
which won't chip or rust. |
|
Steel hand or foot
operated clamp lever to adjust handle
position. |
|
Non-marring bumpers prevent damage to furniture and walls. |
|
|
* Except 10" and 13" models. |
|
|
Reinforced aluminum apron housing for added strength and rigidity. |
|
Optional four gallon solution tank (334898) dispenses liquid for
scrubbing and polishing. |
|
Equipped with 50 Ft. safety yellow power cord. |
|
All models are UL listed. All models except the MD-10A are CSA
listed. |
|
|
|
|
|
MODELS |
Motor |
Current |
Gears |
Wheels |
1/3 HP - 175 RPM
MD-10A (10"
- 340200)
MD-13A (13"
- 355062) |
120V-60 Cycle, 56 Frame |
6.4 AMPS |
2 Idler |
3" Transport |
1/2 HP - 175
RPM
MD-15B (15"
- 355011) |
120V-60 Cycle, 66 Frame |
8 AMPS |
3 Idler |
5" Transport |
3/4 HP - 175 RPM
MD-15C (15"
- 351946)
MD-17C (17"
- 355054) |
120V-60 Cycle, 66 Frame |
11 AMPS |
3 Idler |
5" Transport |
1 HP - 175 RPM
MD-15D (15"
- 355046)
MD-17D (17"
- 351954)
MD-20D (20"
- 351962)
MD-21D (21"
- 360422) |
120V-60 Cycle, 66 Frame |
13.2 AMPS |
3 Idler |
5" Transport |
1 1/2HP - 175 RPM
MD-20E (20"
- 357073)
MD-24E (24"
-364126)
MD-24E (24"
- 351938) |
120V-60Cycle, 66 Frame Dual
Capacitor |
15 AMPS |
3 Idler |
Transport
(5" - 20", 21"
& 4" - 24") |
1 1/2HP - 250 RPM
MH-17E (17"
- 358010)
MH-20E (20"
- 358029) |
120V-60 Cycle, 66 Frame Dual
Capacitor |
15 AMPS |
3 Idler |
5" Transport |
|
|
|
|
|
|
|
|
|
Back to TOP of page
|
|
|
|
|
| |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| Copyright
1999/2001 |
| Boston Cleaning
Equipment & Supply Corp. |
|
| Website designed by |
 |
| All rights reserved |
|
|
|
|
|
