455 Broadway, Everett, MA 02149
(617)
381-0577 1-800-875-0577 FAX: (617) 381-0547
|
|
vacuums
page 1
 page 2 |
| Back to
Online Catalog |
|
|
|
|
|
|
|
|
|
|
|
| The dual motor upright vacuums are designed to meet the rigorous
requirements of daily commercial cleaning. These highly efficient quiet running vacuums
are ideal for use in hotels, schools, offices, hospitals, nursing homes, restaurants and
many other applications.
The TM-1495 with a 14" cleaning path is ideal for use
in small areas and the TM-1895 with an 18" cleaning path
for use in larger areas. |
TM-1495 |
TM-1895 |
|
|
|
|
 |
Four position carpet pile height adjustment. |
|
Full bag warning indicator. |
|
Long life side mounted off center and shielded cog belt
drive design, for a clear cleaning path. |
|
40 Ft. heavy-duty, 3 wire grounded, safety yellow power
cord. |
|
Constructed of impact resistant injection molded plastic. |
|
Easy access to all the debris paths. |
|
Brush strip replacement system, no disassembly required. |
|
CSA listed. |
|
For upright vacuuming, one motor is for the vacuum and
another motor drives the agitator brush to loosen and release embedded dirt from carpets
right up to the baseboard on the right side. |
|
For above-floor-cleaning the brush motor is disengaged.
A built-in stretch hose, wand and attachments provide the flexibility needed to
professionally clean areas quickly and efficiently. |
|
Top fill design triple filter system is engineered for
maximum dirt recovery, and allows the disposable paper bag to reach maximum fill capacity
without losing cleaning efficiency. |
|
Easily converts to a portable canister for cleaning hard to
reach areas with a convenient gravity-centered carrying handle. |
|
Easy to maneuver over surfaces, its low profile and offset
nozzle reaches under and around furniture and other hard to clean areas. |
|
SPECIFICATIONS |
| Vacuum Motor |
120V, 1.2 Hp, 7.5 AMPS -
92 FRM, 70" Waterlift |
| Brush |
Spiral Brush Strips -
Replaceable |
| Drive System |
Long Life Cog Belt |
| Filter System |
Totally Enclosed
Mutli-Ply Disposable Bag,
Motor Inlet Filter and Exhaust Filter |
| Power Cord |
40 Ft. 3-Wire, Grounded |
| Capacity |
6 Quarts |
TM-1495 (354635)
Brush Motor
Brush Speed
Cleaning Path |
TM-1495
(354635
1/5 Hp, 1.3 AMPS
4.325 RPM
14" |
TM-1895 (354643)
Brush Motor
Brush Speed
Cleaning Path |
TM-1495
(354635
1/4 Hp, 1.3 AMPS
5,000 RPM
18" |
|
|
|
Note: Available in 230V - 50/60 Hz |
|
|
|
|
|
|
|
| |
|
| The Poly Contractor's wet/dry and squeegee vacuums are designed for the price
conscious customer who requires quality and durability in a vacuum at an economical price. The
contractor's vacuums are equipped with a 1-1/4 HP motor with built-in wet pickup adaptor,
a choice of 8 or 16 gallon poly tanks and a 1-1/2" wet/dry tool kit.
The contractor's squeegee vacs are equipped with a 1-1/4 or 2 HP motor head, 16 gallon
poly tank and 30" squeegee attachment for rapid removal of liquids. |
 |
|
|
|
| Contractor's
Wet/Dry Vacuums 120V, 2 Stage, 1-1/4 HP
By-Pass Motor - 94 CFM, 84" Waterlift
|
P4821W (345172) 4-Caster, 8 Gallon
Tank |
|
P41521W (345164) Glidemobile, 16 Gallon Tank |
|
| wet/dry |
| Contractor's
Squeegee 16 Gallon Poly Vacuums 120V, 2
Stage, 1-1/4 HP By-Pass Motor - 94 CFM, 84" Waterlift
|
P41521SQ (375039) |
|
P41510SQ (374717) |
120V, 3 Stage, 2 HP By-Pass Motor - 92 CFM,
135" Waterlift
|
P41535SQ (375020) |
|
Note: Available in 100V, 230V - 50/60 Hz, 400 Cycle |
|
|
|
|
|
|
|
 |
The Economy Vacuums are built for wet and dry pickup. A built-in float cage with
foam filter eliminates the need for a separate wet adaptor. Economy models include a
1-1/2" wet/dry attachment kit and are available with 4-caster or glide-mobile style
CRS tanks.
The durable motor heads are molded of plastic and equipped with a 1 or 1-1/4 HP by-pass
motor for fast removal of dirt, soot or liquids.
The optional SQ-1-30" squeegee fits the 7 gallons glidemobile style tank for rapid
pickup of liquids. |
|
|
|
| 1 HP
Economy Models 120V, 1 Stage, 1 HP By-Pass
Motor - 133 CFM, 50" Waterlift
|
609E (318981) 4-Caster,
3-1/2 Gallon Tank |
|
1009E (395463) 4-Caster, 7 Gallon
Tank |
|
1009EPH (395471) Glidemobile, 7 Gallon Tank |
|
| wet/dry |
| 1-1/4
HP Economy Models 120V, 2 Stage, 1-1/4 HP
By-Pass Motor - 94 CFM, 84" Waterlift
|
611E (319007) 4-Caster, 3-1/2 Gallon
Tank |
|
1011E (398578) 4-Caster, 7 Gallon Tank |
|
1011EPH (398586) Glidemobile, 7 Gallon Tank |
|
|
Note: Available in 100V, 230 V - 50/60 Hz, 400 Cycle |
|
|
|
|
|
|
|
| Complete line of poly vacuums are designed for industrial and commercial
applications. Ideal for use in schools, hotels, service stations, shopping centers,
warehouses, hospitals, commercial and industrial facilities, and many other locations.
UL and CSA listed.
Modular in design, the interchangeable components of the poly vacuums make it possible
to select a model for specific applications. |
 
|
|
|
|
| Durable steel or aluminum head
assemblies with choice of 1, 1-1/4, 1-1/2, 2, 2-1/4 and three 1 HP motors designed for
fast removal of dirt, litter, soot and non-combustible liquids. |
Vacuum setup with "Trap Sack" dry filtration
system.
|
The "Trap
Sack" dry filtration system is standard on all vacuums.
Includes removable cloth filter and large totally enclosed disposable paper filter bag for
great filtration area. Three heavy-duty chrome plated spring steel
hold-down clamps with non-marring tips ensure a positive vacuum seal.
Wet pickup adaptor with automatic float shutoff protects the by-pass motor from water
damage when picking up liquids.
Swivel hose connector fits tank inlet for vacuuming and motor
head exhaust fitting (available on most models) for blowing applications. Available
in 1-1/4", 1-1/2" and 2" diameter. |
|
| Convenience outlet is built-in to most motor heads for use with an
electric power nozzle to deep clean carpets. The 5-8 gallon tanks
are equipped with four 2-1/2" swivel casters. The 16 gallon glidemobile style
vacuums are equipped with two 2-1/2" front swivel casters, two 8" rear wheels
and chrome plated steel push handle with quick pin release that slides forward for
storage. The 20 gallon poly vacuums are equipped with two 3" swivel casters,
two 8" rear wheels and stationary chrome handle.
The 16 and 20 gallon glidemobile styles are equipped with a gate valve for quick
evacuation of liquid.
Large vinyl tool caddy for tool storage is standard on
glidemobile vacuums, except the 20 gallon poly, where it is optional.
All poly vacuums are shipped with a dry filter assembly, 5 pack of disposable filter
bags and 1-1/4" or 1-1/2" diameter hose connector. The dry and wet/dry
units with 1-1/4" and 1-1/2" tools are available. Optional 2" hose
connector is also available.
Optional 24" and 30" squeegee attachments are available
for glidemobile style wet/dry vacuums for rapid liquid pick-up. |
|
|
|
| Rotationally molded of high impact plastic with 1/4" wall
construction, poly tanks will not leak or dent and resist chemical attack. Comes
with a five year limited warranty. The no-tip wide base design
features a low center of gravity for excellent stability.
Note: Tank capacities stated are recovery. |
|
|
|
| |
|
|
|
| Complete line of steel and stainless steel vacuums designed for
industrial and commercial applications. Ideal for use in schools, hotels, service
stations, shopping centers, warehouses, hospitals, commercial and industrial facilities,
and many other locations.
UL and CSA listed.
Modular in design, the interchangeable components of the steel vacuums make it possible
to select a model for specific applications. |
|
|
| Durable steel or aluminum head assemblies with
choice of 1, 1-1/4, 1-1/2, 2, 2-1/4 and three 1-HP motors designed for fast removal of
dirt, litter, soot and non-combustible liquids. The "Trap-Sack"
(see above)
dry filtration system is standard on all vacuums. Includes removable cloth filter
and large totally enclosed disposable paper filter bag for greater filtration area.
Three heavy-duty chrome plated spring steel hold-down clamps with
non-marring tips ensure a positive vacuum seal.
Wet pickup adaptor with automatic float shutoff protects the by-pass motor from water
damage when picking up liquids.
Swivel hose connector fits tank inlet for vacuuming and motor
head exhaust fitting (available on most models) for blowing applications. Available
in 1-1/4", 1-1/2" and 2" diameter.
Convenience outlet is built-in to most motor heads for use with an electric power
nozzle to deep clean carpets.
The 4-caster tanks are equipped with 2-1/2" ball bearing
swivel casters. The 7, 12, and 16 gallon glidemobile style vacuums are equipped with
two 2-1/2" front swivel casters, two 8" rear wheels and chrome plated steel push
handle with quick pin release that slides forward for storage.
Large vinyl tool caddy for tool storage is standard on glidemobile vacuums.
All steel vacuums are shipped with a dry filter assembly, 5 pack
of disposable filter bags and 1-1/4" or 1-1/2" diameter hose connector.
The dry and wet/dry units with 1-1/4" and 1-1/2" tools are available.
Optional 2" hose connector is also available.
Optional 24" and 30" squeegee attachments are available for glidemobile style
wet/dry vacuums for rapid liquid pick-up. |
|
|
| The cold rolled and stainless steel tank feature
reinforcing ribs to strengthen tanks so they can handle higher waterlift. Double
roll over bottom seal prevents leaking. Four caster dollies are available for
3-1/2 and 7 gallon tanks. The glidemobile style is available for 7 - 16 gallon
tanks.
The 20 gauge cold rolled steel tanks are finished with baked
enamel exterior and epoxy interior.
Tanks fabricated of high quality and heavy-duty stainless steel protects against
corrosion and are available in various sizes. The 7, 12, and 16 gallon tanks are
equipped with drain valves.
Note: Tank capacities stated are recovery. |
|
|
|
|
|
|
|
|
Back to TOP of page
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| Copyright
1999/2001 |
| Boston Cleaning
Equipment & Supply Corp. |
|
| Website designed by |
 |
| All rights reserved |
|
|
|
|
|
Back and Lumbar Support
Filtration System
Tool Kit Includes:
